Specifications

SWINDELL-DRESSLER CONTINUOUS ANNEALING LINE

Installed 1973

Maximum Unwind outside diameter [in (mm)] 77 (1,956)

Inside Unwind diameter [in (mm)] 24 (610)

Minimum Unwind width [in (mm)] 24 (610)

Maximum Unwind width [in (mm)] 55 (1,397)

Minimum Unwind thickness [in (mm)] 0.018 (0.457)

Maximum Unwind thickness [in (mm)] 0.084 (2.1336)

Maximum Unwind coil weight [lb (kg)] 22,500 (10,125)

Maximum Rewind outside diameter [in (mm)] 77 (1,956)

Inside Rewind diameter [in (mm)] 20.0, 24 (508, 610)

Minimum Rewind width [in (mm)] 22 (559)

Maximum Rewind width [in (mm)] 55 (1,397)

Minimum Rewind thickness [in (mm)] 0.018 (0.457)

Maximum Rewind thickness [in (mm)] 0.084 (2.1336)

Maximum Rewind coil weight [lb (kg)] 22,500 (10,125)

Maximum line speed [ft / min (m / min)]: 400 (122)

Minimum line speed speed [ft / min (m / min)]: 60 (18)

Line operating speed [ft / min (m / min)]: 240 (73)

Furnace length [ft (m)]: 80 (24)

Thread length [ft (m)]: 205 (62)

Dampers control: Allen Bradley, SLC5/04

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

©1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.