 |
|
||||||||
 |
|||||||||
|
|||||||||
|
|
 |
|
|
 |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||
|
|
|
Specifications |
|
|
COLD ROLLING MILL COMPLEX EQUIPMENT Cold Reversing Mill Consisting, but not limited to, the following specifications and general equipment components: Specification: Type : Single Stand, Reversing Mill Original Manufacturer : Meco Material Produced : Flat Roll Mild Carbon Steel Incoming tensile strength = 55,000 pounds/inch 2 Incoming yield strength = 45,000 pounds/inch 2 Rockwell = 65 RB maximum Incoming Strip Thickness : Up to 0.140” Discharge Strip Thickness : 0.010” to 0.100” Strip Width : 36” to 62” Batch Annealing Specification: Type : 100% Hydrogen Atmosphere Annealing Manufacturer : LOI Maximum Stack Height = 200 inches Maximum Charge Weight = 100 tons Minimum Charge Weight = 60 tons Anneal Atmosphere = 100% Hydrogen Furnace Temperature = maximum 1650 degrees Atmosphere Flow = 55,000 cubic feet/minute Base Fan Control = variable speed Cooling = external air and water Average Cycle Time = 30 hours Temper Mill Specification: Type : Single Stand, Reversing Mill Original Manufacturer : Meco Material Produced : Flat Roll Mild Carbon Steel Incoming Strip Thickness : 0.010” to 0.140” Discharge Strip Thickness : 0.010” to 0.100” Strip Width : 36” to 62” | |
