 |
|
||||||||
 |
|||||||||
|
|||||||||
|
|
 |
|
|
 |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||
|
|
|
Specifications |
|
STRAIGHTENING – PEELING – BEVELLING LINE MANUFACTURER: “CALOW” YOP: March 1978 1. Peeler “DORNBERG S 80” with bevelling plant ASM 2, including chips conveyor. 2. Straightener – 2 rolls RPM Z-K STRAIGHTENER RPM Z-K Technical specification - Bar diameter 8 to 20 mm with 1 roll set 20 to 80 mm with 2 rolls set - Bar length 2500 to 4000 mm - Material resistance max 110 kg/mm² - Rolls operation 2 motors in commutating poles 750/1500 rpm, 76/110 kW - Feed speed/rate Max 20 m/min - Transmission member 2 reduction gear - Hydraulic plant 1 electric motor 1460 rpm, 18.5 kW - Pneumatic valves and hydraulic plants 24 V, DC - Operating voltage 380 V, 50 HZ - Absorbed power about 300 kW - Weight of the complete plant about 30000 kg BEVELLING PLANT ASM 2 The plant ASM 2 bevels the bar and roll end with diameter from 6 to 80 mm and length from 2.5 to 4 m. It is composed:. 1 bevelling unit. 1 transport unit. PEELER S 80. Model S 80, with tools registration and hinge toll holder.. Final diameter: 6 to 80 mm. Bar length: 2.5 to 4 m. Principal components:. a) Feeling equipment. b) Feed unit N = 11 kW. c) Peeling group. d) Stretching carriage N = 7/10 kW. e) Output device. f) Embedding head with miller/cutter Ø 6 to 20 S N = 13 kW. g) Head with miller/cutter Ø 20 to 80. h) Turbo generator group TG – 13. i) Hydraulic group Main motor N = 180 kW.
|
|
