|
|
 |
|
|
 |
 |
|
|
 |
 |
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
 |
 |
|
Specifications
|
|
|
AL Pipe Mill Line
Make : Meidensha
New : 1972
Line Spec:
Line Speed : Max. 120 m/min (60m/min ~ 120m/min)
Line Direction : Left to Right (from operation side)
Pass Line Height (on floor) : 900 mm (squeeze roll center)
Line Composition:
1) Entry Equipment, Uncoiler, Coil end Detector, End Shearing Machine,
Coil end Welder, Pinch Roll, Looper, Entry Device side Control Panel
2) Pipe Mill Body
3) Cutting Machine
4) Electric Device for Drive
5) High Frequency Welder
6) Forming Roll
Tube Material Spec.
Material : Aluminum & AL Alloy
GIS (1000 ~ 3000 series),
Clad Material (BA8.12)
Shape : Oval Pipe
Size : 13.2 (+/-0.05) x 2.5 (+/-0.04)
16.0 (+/-0.05) x 2.2 (+/-0.04)
13.0 (+/-0.05) x 2.5 (+/-0.04)
Cutting Length : 350 ~ 3,500 mm
Cutting Accuracy : 350~750 mm+/-0.5mm, 750~3,500 mm+/-0.7mm
Tube Curve : Total Length less than 0.25% at 500mm
Tube Twist : within 0.5/1000mm, within 1.5/1000mm
Center of Welding Point : 90 degree (+/-45°), within 0.5/1000mm
Tube Welding Spec.
Weld Strength : Raw Material Strength x 0.85 min.
Welding Leakage : one spot/10km (provided good quality pipe)
Confirm at Air Inside Pressure 2.0 kg/cm²
|
|
 |
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|