|
|
 |
|
|
 |
|
|
|
 |
|
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
|
|
|
Specifications
|
|
|
Used
3 Roll Bend 6 meter Length,
Edge Miller, Post Bend, Double Joint External & Internal Weld Station with Clamp,
10 Ton Over Head Crane 3 Sets
For LSAW Pipe Mill
German Made Schafer in 1990
Excluding Power Source of Welder, X-Ray, Hydrostatic Tester
And All Conveyor, etc
Excluding End Facer
Under Operation
18" ~ 60" Dia x 26mm Thickness x 6.1 meter L
Production Capacity :
100 PCS/ 10 Hour working at 6 meter Length
Regardless of thickness & size.
Or 60,000 Ton/ Year 2 Shift
1. Edge Milling Machine Including 45 Degree Spare Miller Head
(Attached is 35 Degree)
Including Vacuum Lifter
A) Plate Length : Max 8,000mm
B) Plate Width : 1400 ~ 4000mm
C) Plate Thickness : 6 ~ 25mm
2. Three Roll Bending Machine: German Made Schafer in 1990
Including Spare 3 Rolls
A) Plate Length : 2000 ~ 6100mm
B) Plate Width : 5000mm
C) Plate Thickness : 26mm
3. Post Bending Machine
Including 1 Spare Bending Roll Head Set
A) Pipe Length : 3000 ~ 6100mm
B) Pipe Dia : 400 ~ 1524mm
C) Plate Thickness : 26mm
4. Double Joint External (Clamp Type)
Built in 1990 by CRC - EVANS, USA
Including Power source Welder: Lincoln Arc Welder DC 1500 A: 1 Set
Including 1 Spare Power source
A) Pipe Length : 6000 ~ 12000 mm
B) Pipe Dia : 400 ~ 1500mm: 18" ~ 60"
C) 90 KW
D) Column/ Weld Head: CRC Evans, USA: 1 Set
Wire Supply Motor: DC 380 W: 1 Set
Turning Device: 1 Set
5. DOUBLE JOINT INTERNAL WELDING STATION BASE
Built in 1990 by CRC - EVANS, USA
Including Power source Welder: Lincoln Arc Welder DC 1500 A: 1 Set
Including 1 Spare Power source
A) Pipe Length : 12000 mm
B) Pipe Dia : 400 ~ 1500mm: 18" ~ 60"
C) 19 KW
D) Car / Boom : 1 Set
Wire Supply Motor: DC 380 W: 1 Set
Turning Device: 1 Set
Including Compressor and 1 Spare Compressor
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
