|
|
 |
|
|
 |
|
|
|
 |
|
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
JCO type Pipe Manufacturing Plant
|
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
|
|
|
Specifications
|
|
|
JCO TYPE API5L PIPES MANUFACTURING PLANT
35,000 TPY – 2SHIFT
20MM (MAX 60MM) THICKNESS, MAX 54” DIA, 12.2 M LONG
1) Raw Material Handling magnet
Make: Japan
Type: Electric magnetic lifter
Max. 15 Tons
2) Vaccum Lifter
Year: 2006
Make: Korea
Type: Vaccum type
Max. 20 Tons
3) Edge Miller
Year: 1988
Make: Hommer, Japan
Type: Head moving type
Single head, AC 45 KW, DC 11 KW (head traversal),
Feed: Max. 3.5 m/min
4) JCO Press
Year: 2006
Make: Hyundai/Oil-gear, Korea
Capacity: 2 to 3 pipes per hour. (As per information given by the original Owner during inspection)
Type: Tie rod
6000 Ton capacity
1500 mm stroke
250 bar pressure
Servo valve control with touch screen mode
Self fault display function
60mm x 12”/54” x 12.5 M
API5L, X70 grade product.
5) Post bender
Year: 2007
Make: Hyundai/Oil-gear
Type: Roll forming
400 Ton press force
80-100mm/sec speed
Touch screen mode
Self fault display function
60mm x 12”/54” x 12.5M
API5L, X70 grade product
Entry, delivery table
6) Tack Welder
Year: 2006
Make: Daekyeong, Korea
Type: Hydro pressing
300 Tons press force
135mm stroke
CO2 type, 500A welder
7) Seam welder
Year: 2007
Maker: Hyundai
Type: Manual seam weld
CO2 welder, 500A
Welding table included
8) Inside welder & No 1 Outside welder
Year: 2006
Make: Daekyeong/lincon
Type: Traverse car
Max. 20 tons handle
Welder (inside): 2 pole
Welder (outside): 2 pole
DC 1500A, AC 1250A
Lincon made
Thick gage pipes 1 pass
Weld use for No1 OD manipulator
9) Outside welder
Year: 2006
Make: Daekyeong/Lincon
Type: Traverse car
Max. 20 Tons handle
Welder (inside): 2 pole
Welder (outside): 3 pole
DC 1500A, AC 1250A
Lincon made
10) Calibration press for outside of pipes
Year: 2006
Make: Daekyeong, Korea
Type: tie rod
Max. 2000 Tons
250 bar pressure
Entry, delivery table
Tilting support for entry, delivery
11) End Facer
year: 2007
Make: Romar (china)
Type: Direction cut
6 step speed change
1200 mm dia face
20 ton lift traverse car
16mm max. cut/depth
400-1500mm diameter
12.5M long
Max. 90mm thickness
Cut to be inverter controlled
12) X-ray inspection device
Year: 1991
Type: Rich Seifert (german)
Generator: ISO Volt 225KVMA
Image intensifier (7 ¾)
PLC: S5 Siemens
Include mechanical system (boom & car)
2004 revamp for Tube housing, image process
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
