Specifications

ROLLING MILL PLANT FOR ROUND BARS

(Production range: 8-32 mm. round bars)

- Plant hourly capacity = 40 tons/h

- Plant annual production = 250,000 tons/year

Type of steel: St 37.2 - St 44 - BS 4449/88 GR60

Low Carbon Steel <= 0.045C

1. TECHNICAL FEATURES OF THE 40 t\h ROLLING MILL

1.1 Billet size 120x120 130x130 mm

1.2 Billet length 4.2 m

1.3 Max billet weight 540 kg

1.4 Production range 8 -32 mm

1.5 Bars length 6 – 9- 12 m

1.6 Plant performance

1.7.1 Max. yearly capacity

( Based on 3 shifts\day - 300 days\year ) 250.000 Mt

1.7.2 Number of production lines 2 80% Contemporaneously

1.7.3 Max hourly production 40 t

1.7.4 Max speed to the cooling bed # 1 18 m\s

1.7.5 Max speed to the cooling bed # 2 7.5 m\s

1.7.6 Electrical power installed 9000 Kw ~

1.7.7 Type of steel St 37.2

St 44 or BS 4449\88 GR60 Low Carbon Steel

<= 0.045C ROLLING LINE # 1

Pneumatic Repeater and bar duct downstream to the Pomini Tandem

Tandem Intermediate Mill Danieli 320

Emergency Pneumatic Shear (Installed at the first DL 300 entry side)

ROLLING LINE # 2

Intermediate Mill Danieli 320 (Stand # 1 )

Intermediate\ finishing Mill Danieli 320 (Stand # 2 )

Note: The stand #2 is the finishing stand for the diameters: 26 \ 28 \ 30 mm

Note : All equipments, used and overhauled, are guaranteed for 6 months from start up

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

©1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.