Specifications

300,000 TPY BAR MILL

Mfg: Ferrco/Danieli

Age: 1975/1990

Material: 150mm square billet

Products Previously Rolled: No.4 through No.18 Reinforcing Bar

EQUIPMENT

Note: All stands horizontal configuration with roller bearings.

(3) 21” Ferrco Mill Stands

(6) 16” Ferrco Mill Stands

(3) 14” Ferrco Mill Stands

(43) Rolls with Chocks and Roller Bearings

(9) Hepburn (U.K.) Combination Gear and Pinion Stands:

2 x 533mm, 300 KW, 79.89:1 and 61.45:1 ratios

2 x 406mm, 500 KW, 36.12:1 and 20.67:1 ratios

1 x 406mm, 300 KW, 14.56:1 ratio

2 x 406mm, 450 KW, 11.13:1 and 8.017:1 ratios

2 x 355mm, 450 KW, 6.22:1 and 5.11:1 ratios

All required Spindles, Spindle Carriers, Couplers, and Shoeplates available.

(11) 12” Danieli Mill Stands

(50) Rolls with Chocks and Roller Bearings for Danieli Stands

(3) Danieli Roller Bearing 12” Pinion Stands

Intermediate Flying Shear, Crop and Cobble Shear, and CV30 Finishing Shear 200’ x 30’ Double Sided Danieli Cooling Bed (1986)

with (2) Product Shears and Gauges

All required Guides and Expendables available

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

©1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.