Home
About
                                         Us
Projects
What's
                                         New
Inventory
Products
Contact
                                         Us
Tinning Line

Previous

Next

 

Up

Equipment No. . 

TLVL-ALU-54-2.00/1

Manufacturer . 

-

 

Description . 

Tension Leveling Line

 

Manufactured .

1995

 

Drawings . 

N

 

Photos . 

 
 

Specifications


    TENSION LEVELER

    General

    Year Built : 1995
    Make : PMC, USA
    Main specification

    Material : Aluminium
    Yield Strength : 34.5KG/CM2(50,000 PSI)
    Tensile Strength : 45 KG/CM2 (65,000 PSI)
    Max.Coil Width : 1350MM(54”)
    Min.Coil width : 600MM(24”)
    Coil Weight : 6Ton
    Coil I.D : 305MM,405MM,508MM
    Max.Thickness : 2.0MM
    Min. Thickness : 0.2MM
    Line Speed : 152MPM (500 FPM)
    Line Composition

    1) Uncoiler : Used
    2) Coil Car : 2 Sets(Used)
    3) Peeler Table : 2 Sets (Not Fabricated)
    4) Pinch Roll : 2 sets (Not Fabricated)
    5) Crop Shear : 2 Sets ( Not Fabricated)
    6) Hydraulic Coil(Joiner) : 1 Set
    Capacity : Max. 0.078”/Min.0.008”
    Thickness of Two End : 0.16”
    A)Hydraulic Type
    B)Single Row Design
    C)75 HP Motor, Controls and Enclosures
    D)Hydraulic Controls
    E)PLC Controls
    7) Entry 4 Roll Tension Bridle Roll Unit

    A) Four(4) 48” Polyurethane Coated Bridle Rolls
    B) Four(4) 10” Threading Rolls
    C) One(1) 20” Deflector Roll
    D) Guiding Plates for Ease of Threading
    E) Individual D.C.Motor and Gear
    Reducers for Each Bridle Roll
    #1 Bridle -22.4 Kw 1150 RPM
    #2 Bridle -22.4kw 1150 RPM
    #3 Bridle -44.7 kw1150 RPM
    #4 Bridle -44.7 kw 1150 RPM

    8) 6 Hi Tension Leveller Unit

    A) 1.625” 6 Hi Leveler Rolls
    B) PLC Controlled Levelling Process
    C) LPGS and Local Operator Panels
    D) Pull –out Cassette Type

    9) Exit 4 Roll Tension Bridle Roll Unit

    A) Four(4) 48” Polyurethane Coated Bridle Rolls
    B) Four(4) 10” Threading Rolls
    C) One(1) 20” Deflector Roll
    D) Guiding Plates for ease of Threading
    E) Individual D.C Motor and Gear Reducers
    For each Bridle Roll
    #1 Bridle-223.8KW1150 RPM
    #2 Bridle- 149.2KW1150 RPM
    #3 Bridle-93.2KW-1150RPM
    #4 Bridle-44.7KW-1150RPM

    10) Inspection Table-1 Set (Not Fabricated)

    11) Pass Line Roll- 1Set

    12) Recoiler- 1 Set

    A) 111.9 KW 650/1950 RPM DC Drive Motor
    B) S.C.R Controls

    13) Electrical Controls

    A) Operation Control and Consoles
    B) Auxiliary Operation Controls and Console
    C) Motor Controls and Enclosure
    D) Hydraulic Controls
    E) Pneumatic Controls

If you didn't find what you are looking for, or need further information on a specific item,  email us.

[Home] [About Us] [Projects] [What's New] [Inventory] [Products] [Contact Us]

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

©1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.