|
|
 |
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
Bronx 4 High Skin Pass Mill |
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
|
|
|
Specifications
|
|
|
Four High Temper Mill
BRONX 4-Hi Non-Reversing Skin Pass Mill Line
Built 1976
I. Line Specification
Material Galvanized Low Carbon Steel
Speed:
Minimum 15.0 M/min, 49.2 ft
Maximum 90.0 M/min, 295.3 ft
Line acceleration/deceleration rate 15.0 M/min, 49.2 ft
Maximum gauge:
1,250mm wide 2.8 mm, 0.11"
1,000mm wide 3.5 mm, 0.14"
915mm wide 3.8 mm, 0.15"
Minimum gauge 0.25 mm, 0.01"
Width:
Minimum 610.0 mm, 24.02"
Maximum 1,250.0 mm, 49.21"
Elongation (max) 1%
Coil sizes:
Incoming:
OD 2,000.0 mm, 78.74"
ID 508.0 mm, 20.00"
Weight 15.0 m tons, 16.5 s tons
Outgoing:
OD 2,000.0 mm, 78.74"
ID 508.0 mm, 20.00"
Weight 15.0 m tons, 16.5 s tons
Electrics:
532 KVA, 460 VAC, 3 Phase, 50 Hz
160 KVA, 380 VAC, 3 Phase, 50 Hz
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
