Specifications

ELECTROLYTIC TINNING LINE

A) GENERAL DATA

Generalities

Start up : June 1961( 96 K Amp)

Main revampings

1965 : Recoiling
1970 : Tension Leveller Clecim (between the 2 entry pits)
1972 : Increase of capacity
96 ® 128 K Amps (+ 4 tanks)
1985 : Sn gage
1992 : New Sn gage
New entry coil-cars
New entry accumulators
Tension leveler in the central section
Degreasing and pickling Section modernization
1 new electrolytic cell
1999 : Revamping of the electrical equipment in the exit section
2000 : New work rolls in the leveler
Shutted down : May 2002

2. Main constructors

Mechanical parts : DMS
Welding machina : Electromecanique
Degreasing adaptation : Beugin
Leveller : Clecim (+ Redex)
Electrostatic oiling : TRION
Electrical equipment : Alstom (+ revamping by Techno Assistance) )

3. Main characteristics

Capacity : 150 KT/Y
Dimensions Width : mini 600 mm
Maxi 1016 mm before side trimming
1000 mm after side trimming
Thickness : Mini 0,14 mm
: Maxi 0,5 mm
Coils Entry Exit
Max weight 13,5 Tons 20 Tons
Mandrel 419 mm 419 mm
Outside max Diameter 1700 mm 2100 mm
Sn coating
0,5 to 15 gr/m²/each side
Oiling : 1 to 10 mrg/m² each side
Speed
Process section : max 420 m/min
Entry section : max 550 m/min
Exit section : max 420 m/min (flying shear 100 m/min) Loopers
Entry : 442 m (65 sec at max process speed)
Exit : No
Sn electrolysis cells

9 cells, each 16 K Amps Total 144 K Amps

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

©1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.