Home
About
                                         Us
Projects
What's
                                         New
Inventory
Products
Contact
                                         Us
Roll lathe

Previous

Next

 

Up

Equipment No. . 

Mon-60-33ft/1

Manufacturer . 

Schiess Froriep,Germany
 

Description . 

Roll lathe

 

Manufactured .

1962

 

Drawings . 

 
 

Photos . 

 
 

Specifications


    60"x33'Roll Lathe


  • Yr of Installation:1962
  • Mfg :Schiess Froriep,Germany
  • Year of Shut Down : 1986
    Operating Dimensions :
  • Height of centers over bed : 31.5"(800mm)
  • Distance between centers between faceplate and tail stock center 33" (10,000mm)
  • Maximum workpiece weight :120,000 #(60 t)
  • Maximum swing Diameter over bed 61"(1,550mm)
  • Maximum swing Diameter over carriage 51" (1,300mm)
  • Torque on face plate 12,000mKG
  • Maximum operating cutting thrust for the slide rest 18,000 KG
    Travel Operations :
  • Traversing path for the slide rest 315"(8000mm)
  • Path of tool holder slide (right slide rest-thread cutting)31.5"(800mm)
  • Path of tool holder slide left slide rest 23.6"(600mm)
  • Path of tool holder(right and left slide rests) 9.84"(250mm)
  • Displacement of tail stock center sleeve 9.84"(250mm)
  • Speeds:
  • Speed range of face plate in 3 stages ,infinitely variable for each stage.

  • Stage 10.42-4.2-10.4 R/min
  • Stage 21.3-13-32.4 R/min
  • Stage 34.2-42-104 R/min
  • Feed Motions :
  • Feed motion range for the slide rests in 4 stages ,infinitely variable via PIV-gears for each stage.
  • Range of Longitudinal Feeds
  • Stage 10.23-1.38 mm/min
  • Stage 21.38-8.3 mm/min
  • Stage 38.3-50mm/min
  • Stage 450-300mm/min
  • Range of cross Feeds :
  • Stage 10.115-0.69 mm/min
  • Stage 20.69-4.15mm/min
  • Stage 34.15-25mm/min
  • Stage 425-150mm/min
  • Traverse movement of the tool holder slide 30.7"(780 mm/min)
  • Tools :
  • Workpiece -holding steel cross section 70x70 mm
  • Lathe Center-tail stock 140 mm
  • Head stock 100
  • Lathe center angles 60 Degrees and 90 Degrees
  • Drive Motors :
  • Power of main motor (Leonhard Drive) 100HP (73kw)
  • Speed of main motor 60-600 0 1,500 R/min
  • Power of slide rest traversing motor 5 HP (4kW)(feed motion and rapid traverse motion)
  • Speed of slide rest traversing motor 1,450 R/min
  • Main Dimensions of machine :
  • Face plate diameter (head stock) 63"(1,600mm)
  • Main Spindle diameter in front bearing 19" (480mm)
  • Diameter of tail stock center sleeve 17"(440mm)
  • Distance from middle of center to tool rest(slide rest) 2.76"(70mm)
  • Bed width 92.5"(2,350mm)
  • Bed width 27.5"(700mm)

If you didn't find what you are looking for, or need further information on a specific item,  email us.

[Home] [About Us] [Projects] [What's New] [Inventory] [Products] [Contact Us]

367 Mansfield Avenue, Pittsburgh, PA 15220 USA
Tel: (412) 928-2880 | Fax: (412) 928-2881

1999 Sherman International Corporation. All rights reserved.

Please contact our Webmaster with questions or comments.