|
|
 |
|
|
 |
|
|
|
 |
|
|
|
Equipment No. — |
|
Manufacturer — |
|
Description — |
Stainless Steel Melt Shop |
|
Manufactured — |
|
Drawings — |
|
Photos — |
|
|
|
|
Specifications
|
|
|
Specification
Electric Arc Furance
Installed : 1971
Supplier : ASEA
Revamped : Hydraulics and Electrode Arms ( Conventional Type)
Water Cooled Panels and Roof
Control System (Level 1 and 2)
Furnace Platform and Shell
Transformer
Heat Size : 80 Ton
Furnace Shell : Spout Type, Diameter 5.8m
Transformer : 80 MVA (ABB)
Primary Voltage : 20/33 Kv (Primary Windings for 20 or 33Kv)
Secondary Voltage : 624-513-408V
Tap-Changer : On Load Type, 16 Positions
Lime and Dolomite : Injection via Roof
Alloy addition : Mainly FeSi for Reduction, by means of Fork-Lift with Charging Device.
Alloys Battery : Shared with CLU Converter
Panels and Roof : Water Cooled
Scrap Pre-Heater : 2 Positions, using Furnace Off-Gas
Automation : Level 1 and 2 (meltdown control)
Continuous Caster
Installed : 1980
Supplier : Voest Alpine
Revamped : Cutting Torches
Control System (level 1 and 2)
Mould Level Control System (NKK)
Billet Moulds and Mould Level Control (Berthold)
Radius : 9 m
Max.Met. Length : 18 m
Tundish : 10 ton
Casting Speed : 0.4-2.5 m/min
Mould Level Control : Billets (co-60 (Berthold)
Blooms and Slabs Inductive (NKK)
Blooms : 300x 400
265x 300
265x 450
300x 450
Billets : 140x 140
150x150
Slabs : 150x 800-1580
200x 800-1580
300x 1600
|
|
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
